In a Pick game type, numbers that are consecutive from lower to higher number we will call them the Diagonal Lines Right lines.

Here is example of numbers 3 4 5 which are Diagonal Lines Right in a Pick 3 game.

In every Pick game there are only 8 such lines.

When selecting numbers, be aware that diagonal right lines—combinations where the digits form consecutive ascending numbers like 123, 456, or 789—are relatively rare. While these patterns do appear from time to time, their frequency is much lower compared to more mixed or varied number sets. Because of this, relying heavily on diagonal right lines may limit your chances. It’s best to use them sparingly as part of a broader mix, while focusing more on the number types and patterns that historically occur more often.

This filter can be used to filter out lottery numbers, wheel system combinations, or generated tickets.
You can filter those numbers to reject or accept numbers that are Diagonal Lines Right numbers.

On the Filters page select the Add Filter tab, choose Distribution of Pick Numbers Pattern main filters from the list on the left side of page.
Select Pick All Diagonal Lines Right filter from the list on the right side of page.

Click the Add Filter button located on the toolbar. Selected filter will be added to your Game Filters list.
If you want to add more than one filter, select more filters using CTRL+A keys to select them all or hold CTRL key and select filters with mouse
 
For more detailed information about filters page please see Filters Interface topic
 

After adding the filter, you can go to the Game Filters page in the same Filters window to edit the filter properties.

The added filter will be located under the Diagonal Lines Right group of all filters, with its value in the Property cell set to 1 as
 
Use

If selected, the filter will be used to apply filtering.
 

Action

Sets the filter action applied by the filter to determine the final outcome when filter's condition is met.

You can choose to accept or reject numbers

Select your preferred option from the drop-down menu in the Action column.

- When you choose Accept action then:
All numbers that are  Diagonal Lines Right will be accepted

- When you choose Reject action then:

All numbers that are Diagonal Lines Right will be rejected
 
Property

Sets the filter for analyzed numerical values; you can configure it here:

This filter does not have any property to configure; instead, it only displays:

You can adjust the filter property here to select a different number for analysis by choosing another option from the drop-down combo box.

You can modify the filter property to choose a different number for analysis by either using the spin edit control or typing the number directly into the property cell.

 
Number Main Type

Sets the filter for Number Main Type, allowing you to filter numbers by their type.

If the main type is set to ALL, then all numbers are included regardless of their type.

Please refer to the Filters - Types of Numbers topic for more information about filtering numbers by their type.

You can select the type of number you want to filter by from the drop-down menu.

Number Subtype

Displays or sets the filter for Number Subtype, allowing you to filter numbers by their type.

If the sub type is set to ALL, then all numbers are included regardless of their sub type, only those set in the Number Main Type property are included.

Essentially, you can filter numbers by their occurrences in various types of number configurations.

You can select the type of number you want to filter by from the dropdown menu.

 
Value

Sets the condition value for the filter to be satisfied.

You can set here for example:

Range

Displays or sets the filter's condition range value, used only when the filter's condition is set to a Range of Values.

Condition

Filter conditions you can apply to meet the filter Value option criteria .

You can select a filter condition from drop-down list combo box one of the following conditions:

Numbers that form diagonal sequences moving toward the right side of the grid (e.g., 1-10-19 or 5-14-23).

6. Diagonal Lines Right (Consecutive Increasing Digits, e.g., 123, 345)

Diagonal Lines Right

When the Action is set to Reject, then:

Excludes tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have the exact quantity of number types specified in the Main Number type and/or Numbers Subtype options.

When the Action is set to Accept, then:

Includes only tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have the exact quantity of number types specified in the Main Number type and/or Numbers Subtype options.

Equals Filter Value

When the Action is set to Reject, then:

Excludes tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have the exact quantity of number types equal to the specified types in the Main Number type and/or Numbers Subtype options.

When the Action is set to Accept, then:

Includes only tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have the exact quantity of number types equal to the specified types in the Main Number type and/or Numbers Subtype options.

Higher than Filter Value

When the Action is set to Reject, then:

Excludes tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types greater than the specified types in the Main Number type and/or Numbers Subtype options.

When the Action is set to Accept, then:

Includes only tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types greater than the specified types in the Main Number type and/or Numbers Subtype options.

Lower than Filter Value

When the Action is set to Reject, then:

Excludes tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types less than the specified types in the Main Number type and/or Numbers Subtype options.

When the Action is set to Accept, then:

Includes only tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types less than the specified types in the Main Number type and/or Numbers Subtype options.

Range of Values

When the Action is set to Reject, then:

Excludes tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types within the specified range in the Main Number type and/or Numbers Subtype options.

When the Action is set to Accept, then:

Includes only tickets or wheel system combinations where all numbers forming the diagonal lines right pattern have a quantity of number types within the specified range in the Main Number type and/or Numbers Subtype options.
 

Here is the example of setting up filter to filter wheel system or numbers when generating tickets:
For example in a game 6/49 and for flexible and rather fail safe filtering please do as following
Set the Action property to Reject
Set the Number Main Type and Number Subtype to All

Under Filter Condition Options > Value set the value to
Under Filter Condition Options > Condition choose More Than Filter Value condition

Select from the Visual Analyser menu select:

Types of Numbers > Diagonal Lines Right
The result of analysis is shown on a Visual Analyser's screen

If you want to see how the numbers were drawn and all of them were consecutive,
then select from the menu Numbers > Distribution > Pick Diagonal Right or Numbers > Distribution > Pick Diagonal Left

Here is an example diagram that shows how numbers were drawn and when all, were the consecutive numbers at the same time.

If number was NOT drawn then diagram will show a point in row 0

If number was drawn then diagram will show a point in row 1 or 2 etc, that depends how many numbers were drawn.

The next diagrams will show analyzes of numbers that were drawn with pairs of numbers and at the same time were drawn as Contact, Cold etc numbers

In this analysis method the Number Type Switch is enabled.
 

The Number Main Types are:
Contact, Outside, Hot, Cold, Odd, Even, Connected, Unconnected, Disconnected
 

The Visual Analyzer evaluates numbers in all possible combinations.

Each Number Main Type can appear individually or in combination with others.

When you change the primary number type using the Number Type Switch, diagrams display the analysis of the examined numbers and how they are represented as the primary number type in combination with other types.

.